CB-HRT is a heat-resisting polyolefin heat-shrinkable tubing which is flexible, insulation and resistant to common fluids and solvents. This tubing can be used for electrical insulation and strain relief of components that are exposed to high temperature. This tubing meets UL224 requiments.
Specifications |
Item |
Specifications |
|
Shrink Temperature |
120°C |
|
Temperature Rating |
150°C |
|
Radial Shrinking Ratio |
≥50% |
|
Longitudinal Change |
≤5% |
|
Tensile Strength/MPa |
≥10.4mpa |
|
Ultimate Elongation Ratio |
≥200% |
|
| Aging in Circulating-air Oven | 180.0±1.0°C, 168hrs | |
After aging |
Tensile Strength/Mpa |
≥7.3 |
Ultimate Elongation |
≥100% |
|
Concentricity |
≥65% |
|
Volume Resistivity/Ωcm |
≥1014 |
|
Dielectric Strength /KV/mm |
≥15 |
|
Water Absorption |
less than 0.4% |
|
Copper Corrosion |
No corrosion |
|
Other sizes are available upon special order.
| Size |
Size |
As Supplied(mm) |
After Recovery(mm) |
||
Inside Diameter |
Wall-thickness |
Inside Diameter |
Wall-thickness |
|
φ0.8 |
1.3±0.2 |
0.20±0.05 |
≤0.40 |
0.40±0.05 |
φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.55 |
0.40±0.05 |
φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.75 |
0.42±0.05 |
φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.0 |
0.44±0.05 |
φ2.5 |
3.0±0.2 |
0.22±0.05 |
≤1.25 |
0.47±0.05 |
φ3.0 |
3.5±0.2 |
0.25±0.05 |
≤1.5 |
0.50±0.05 |
φ3.5 |
4.0±0.3 |
0.25±0.05 |
≤1.75 |
0.50±0.05 |
φ3.5T |
4.0±0.3 |
0.56±0.05 |
≤1.75 |
1.10±0.05 |
φ4.0 |
4.5±0.3 |
0.25±0.05 |
≤2.0 |
0.50±0.05 |
φ4.5 |
4.8±0.3 |
0.25±0.05 |
≤2.0 |
0.52±0.05 |
φ5.0 |
5.5±0.3 |
0.25±0.05 |
≤2.5 |
0.52±0.05 |
φ6.0 |
6.5±0.3 |
0.25±0.05 |
≤3.0 |
0.52±0.05 |
φ6.5 |
6.8±0.3 |
0.30±0.05 |
≤3.0 |
0.60±0.05 |
φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.5 |
0.60±0.05 |
φ7.0T |
7.5±0.3 |
0.40±0.05 |
≤3.5 |
0.80±0.05 |
φ8.0 |
8.5±0.3 |
0.36±0.08 |
≤4.0 |
0.70±0.08 |
φ9.0 |
9.5±0.3 |
0.36±0.08 |
≤4.5 |
0.70±0.08 |
φ9.0T |
9.5±0.3 |
0.40±0.08 |
≤4.5 |
0.80±0.08 |
φ10 |
10.5±0.4 |
0.36±0.08 |
≤5.0 |
0.70±0.08 |
φ11 |
11.5±0.4 |
0.36±0.08 |
≤5.5 |
0.70±0.08 |
φ12 |
12.5±0.4 |
0.36±0.08 |
≤6.0 |
0.70±0.08 |
φ13 |
13.5±0.4 |
0.36±0.12 |
≤6.5 |
0.70±0.12 |
φ14 |
14.5±0.4 |
0.36±0.12 |
≤7.0 |
0.70±0.12 |
φ15 |
15.5±0.4 |
0.36±0.12 |
≤7.5 |
0.70±0.12 |
φ16 |
16.5±0.4 |
0.36±0.12 |
≤8.0 |
0.72±0.12 |
φ17 |
17.5±0.4 |
0.36±0.12 |
≤8.5 |
0.77±0.12 |
φ18 |
18.7±0.5 |
0.40±0.12 |
≤9.0 |
0.77±0.12 |
φ20 |
20.6±0.8 |
0.40±0.12 |
≤10.0 |
0.80±0.12 |
φ22 |
22.7±0.8 |
0.46±0.12 |
≤11.0 |
0.90±0.12 |
φ25 |
25.5±0.8 |
0.46±0.12 |
≤12.5 |
0.90±0.12 |
φ28 |
29.2±0.8 |
046±0.12 |
≤14.0 |
0.90±0.12 |
φ30 |
31.0±0.8 |
0.46±0.12 |
≤15.0 |
1.00±0.12 |
φ35 |
≥35 |
0.50±0.15 |
≤19 |
1.00±0.30 |
φ40 |
≥40 |
0.50±0.15 |
≤21 |
1.00±0.30 |
φ50 |
≥50 |
0.50±0.15 |
≤27 |
1.00±0.30 |
φ55 |
≥55 |
0.50±0.15 |
≤28 |
1.00±0.30 |
φ60 |
≥60 |
0.50±0.15 |
≤31 |
1.00±0.30 |
Size in Inches
SIZE |
As supplied in mm |
After Recovery (mm) |
||
MIN ID (in mm) |
WALL (in mm) |
MIN ID (in mm) |
WALL (in mm) |
|
3/64 |
1.2 |
0.18±0.05 |
≤0.6 |
0.30±0.05 |
1/16 |
1.6 |
0.18±0.05 |
≤0.8 |
0.32±0.05 |
3/32 |
2.4 |
0.18±0.05 |
≤1.00 |
0.35±0.05 |
1/8 |
3.2 |
0.20±0.05 |
≤1.5 |
0.38±0.05 |
3/16 |
4.8 |
0.23±0.05 |
≤2.0 |
0.45±0.05 |
1/4 |
6.4 |
0.25±0.05 |
≤3.0 |
0.50±0.05 |
3/8 |
9.5 |
0.30±0.08 |
≤4.5 |
0.60±0.08 |
1/2 |
12.7 |
0.30±0.08 |
≤6.0 |
0.60±0.08 |
3/4 |
19.1 |
0.40±0.12 |
≤10.0 |
0.75±0.12 |
1 |
25.4 |
0.45±0.12 |
≤12.5 |
0.90±0.12 |
Other sizes are available upon special order.